The difference of each person leads to the feeling that the lifting speed is slow or fast when using the elevator. However, don't worry. Since the elevator is a hydraulic equipment, the speed can be adjusted. However, before this, we need to understand the lifting principle. Next, we will take you to understand how to control the lifting speed of the elevator.
The lifting principle of the lift is to drive the hydraulic oil to generate pressure through the power unit to make the oil cylinder piston reciprocate and drive the lift table to rise and fall. The lifting speed is controlled by the air pressure and oil volume of the oil tank. Pay attention to the air pressure of the oil tank at any time during the work, and the pressure must be kept within the specified range. If the pressure is too low, the oil pump is easy to be damaged due to insufficient oil absorption. If the pressure is too high, the hydraulic system will leak oil and the low-pressure oil pipe will burst easily.
Specifically, by increasing or reducing the hydraulic oil flow of the cylinder or the cylinder size, if the demand is met, the cylinder size can be reduced as much as possible. The smaller the cylinder size, the faster the lifting speed. In addition, the length of the hydraulic oil pipe will also be affected. The longer the hydraulic oil pipe, the longer the lifting time. Therefore, when ordering the elevator, the length of the oil pipe shall be reduced as much as possible when the demand is met.
