Self Propelled Aluminum Mast Lifts Are Ready To Ship To The USA
12 units CR-6.5 self-propelled aluminum mast lift finished packing and sent to the United States. They are shipped in a 20ft container.
The CR-6 aerial work platform is a top-of-the-line machine that is renowned for its durability, ease of use, and versatility. Made of lightweight and sturdy aluminum alloy, this self-propelled aerial work platform can easily move through standard doorways and enter and exit elevators without any difficulty. It is powered by a DC battery, which makes it energy-efficient and eco-friendly. The low noise level during operation ensures that the machine can be used even in quiet environments without disturbing others.
The CR-6 aerial work platform is designed with safety in mind. It has load detection functions that prevent the platform from rising beyond the rated load. The pothole protection function is also integrated into the machine to ensure that it stops automatically if there is any danger of falling into a pothole. The machine is also equipped with a sensor switch that sends a signal if the ground slope is greater than 2 degrees, which allows the operator to be aware of the terrain and work safely.
In addition to being safe and efficient, the CR-6 aerial work platform is also stylish. The customer from the USA requested a custom all-black body that adds an extra touch of elegance to the machine. The machine has a maximum platform height of 6 meters and can carry a load of up to 150kg. It measures 1.89 (1.4)/0.76/1.99 in length, width, and height respectively. The machine is fitted with two high-elastic rubber gray tires at the front and rear, with a tire diameter of 305mm and a width of 100mm.
The machine is equipped with hydraulically controlled front-wheel steering and front-wheel electric drive. It has a power of 0.5KW*2, and its lifting motor is 2.2KW. The working voltage is 24VDC, and the charging voltage is 220VAC. There are two 100AH batteries on board, which can power the machine for extended periods. The telescopic guardrail can extend 480mm longitudinally, providing additional safety for the operator while working at height.
The CR-6 aerial work platform is also equipped with a range of safety features, including buzzers, strobe lights, horns, emergency descending cables, and waterproof charging plugs. These features ensure that the operator can work safely and efficiently in any environment, whether indoors or outdoors.
the CR-6 aerial work platform is a machine that ticks all the right boxes. It is safe, efficient, versatile, and stylish, making it the perfect choice for anyone looking for an aerial work platform that can handle a wide range of tasks. With its range of safety features and powerful performance, this machine is sure to exceed your expectations and deliver results that are second to none.
For more information about the self-propelled aluminum mast lifts, welcome to contact us.
Shandong Cathay Machinery Co., Ltd
www.cathaylift.com
Email: sales@cathaylift.com
