Although the lifting platform is a high-altitude operation equipment, there will still be some small movements during the lifting operation. In fact, a slight shaking of the lifting platform after lifting is allowed, but if the amplitude exceeds the limit, it proves that There is a problem with the lifting platform, and the operation needs to be stopped immediately for inspection. Below, Shandong Cathay Machinery will take you to understand how to solve the shaking of the lifting platform during operation：
1. The shaking amplitude of the lifting platform is proportional to its own lifting height. The greater the lifting height is, the greater the shaking amplitude will be. Before the lifting platform is lowered, it is necessary to open all the four support brackets and ensure that the four The outriggers are in full contact with the ground, and the lifting platform should be placed on a flat and solid ground as far as possible for operation.
2. The operator should try to work in the middle of the table. If it is necessary to place goods, pay attention to minimize the load difference on both sides of the table to prevent partial load. When working outdoors, if the wind is too strong, it is necessary to stop the operation.
3. The frame structure of the lifting platform is damaged and deformed. This kind of situation is very serious, but it is basically rare. In this case, you can only contact us for after-sales maintenance, and there is a long period of time between the pin and the bearing. After rubbing, voids will appear, resulting in overall shaking.
In short, the shaking within the safe range will not affect the high-altitude operation of the lifting platform. You can use it with confidence. If the shaking is too large, you must stop using it immediately, and it can be put into use after the fault repair is completed.
